6kV series
- Cylindrical high voltage axial leaded resistor
- Maximum operating voltage from 600V up to 30kV *
- Resistance values from 200Ω up to 2GΩ *
- Tolerances of ±0.1%, ±0.25%, ±0.5% and ±1%
- TCR as tight as ±80 ppm/°C from -15°C to +105°C
- Maximum power rating from 0.5W up to 15W *
- Operating Temperature Range of -55°C to +225°C
- Cylindrical high voltage axial leaded resistor
- Maximum operating voltage from 2kV up to 30kV *
- Resistance values from 600Ω up to 10GΩ *
- Tolerances of ±1% and ±5%
- TCR as tight as ±80 ppm/°C from +25°C to +105°C
- Operating Temperature Range of -55°C to +225°C
- Maximum power rating from 1.5W up to 15W *
- Ultra High Voltage SMD Resistors
- Resistance range from 90MΩ to 50GΩ
- Tolerances from ±1% to ±20%
- TCR of ±100 ppm/°C or ±200 ppm/°C
- Voltage rating from 3kV to 6kV
- Temperature range from -55°C to +150°C
- Ultra High Voltage SMD Resistors
- Resistance range from 120MΩ to 50GΩ
- Tolerances from ±1% to ±20%
- TCR of ±100 ppm/°C or ±200 ppm/°C
- Voltage rating from 4kV to 10kV
- Temperature range from -55°C to +150°C
- Ultra High Voltage SMD Resistors
- Resistance range from 85MΩ to 50GΩ
- Tolerances from ±1% to ±20%
- TCR of ±100 ppm/°C or ±200 ppm/°C
- Voltage rating from 4kV to 14kV
- Temperature range from -55°C to +150°C
- Ultra High Voltage SMD Resistors
- Resistance range from 150MΩ to 50GΩ
- Tolerances from ±1% to ±20%
- TCR of ±100 ppm/°C or ±200 ppm/°C
- Voltage rating from 6kV to 16kV
- Temperature range from -55°C to +150°C
- Ultra High Voltage SMD Resistors
- Resistance range from 90MΩ to 50GΩ
- Tolerances from ±1% to ±20%
- TCR of ±100 ppm/°C or ±200 ppm/°C
- Voltage rating from 6kV to 20kV
- Temperature range from -55°C to +150°C
- Non magnetic X7R (Type 2) MLCC Capacitors
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor maximum of 2.5% at 1Vrms and 1kHz for Un between 16V and 25V and maximum 1% at 1Vrms and 1kHz for Un between 25V and 50V
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E