+44 (0) 1342 330 470

Caddock

5kV series

Services

Downloads

Supporting Manufacturer Information

Caddock USG1105 Series

Ultra-stable precision high voltage axial leaded film through-hole resistors
Typical load life stability 0.025% per 1,000 hours
Temperature range -40°C to +85°C
Utilising Caddock’s Tetrinox® resistance film systems
Custom low TC HV strings are available: 50KV, 100KV, etc.

Exxelia Ohmcraft HVC 5020

High Voltage SMD Resistors
Resistance range from 10kΩ to 50GΩ
Tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to ±200 ppm/°C
Power rating of 2W
Voltage rating of 5kV
Temperature range from -55°C to +150°C

Exxelia Ohmcraft HVD 05

High Voltage Divider
Resistance range from 100kΩ to 1TΩ
Ratio tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to >±200 ppm/°C
Power rating of 1W
Voltage rating of 5kV
Temperature range from -55°C to +150°C

Exxelia Ohmcraft MCH 5020

Military Grade High Voltage SMD Resistors
Resistance range from 10kΩ to 50GΩ
Tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to ±200 ppm/°C
Power rating of 2W
Voltage rating of 5kV
Temperature range from -55°C to +150°C

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (2kV-10kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic NP0 Capacitor Series

Non magnetic NP0 (Type 1) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Dipped X7R Capacitors (1kV – 5kV)

Radial dipped X7R capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E