-55 to +200°C (Cement) series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.75kΩ
- Power rating of 150W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 2.2kΩ
- Power rating of 200W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 2.79kΩ
- Power rating of 250W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 3.5kΩ
- Power rating of 300W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 4.45kΩ
- Power rating of 400W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 5.78kΩ
- Power rating of 500W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 5 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds