-55 to +125°C series
- Power precision resistor
- 2-terminal through-hole design
- Resistance range from 0.002Ω to 100Ω
- Tolerance from ±0.5%
- TCR of <50 ppm/°C
- Power rating 10W on a suitable heat sink
- Temperature range from -55°C to +125°C
- Current sensing precision resistor
- 4-terminal through-hole design
- Resistance range from 0.0005Ω to 1Ω
- Tolerance from ±0.5%
- TCR of <30 ppm/°C
- Power rating 10W on a suitable heat sink
- Temperature range from -55°C to +125°C
- DC ceramic disk capacitor
- Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
- Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute
- AC high temperature ceramic disc capacitors
- Dissipation factor of ≤2.5%
- Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute
- AC high temperature ceramic disc capacitors
- Dissipation factor of ≤2.5%
- Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute
- High-speed, low-power isolated CAN transciever
- Isolation voltage of 2.5kVRMS per VDE V 0884-10
- Working voltage of 600VRMS per VDE V 0884-10
- Thermal shutdown protection
- No carrier or clock for low emissions and EMI susceptibility
- UL 1577 recognised, VDE V 0884-10 certified, fully compliand with the ISO 11898 CAN standard
- Ultraminiature QSOP package
- High-speed, low-power isolated CAN transciever
- Isolation voltage of 2.5kVRMS per VDE V 0884-10
- Working voltage of 600VRMS per VDE V 0884-10
- Thermal shutdown protection
- No carrier or clock for low emissions and EMI susceptibility
- UL 1577 recognised, VDE V 0884-10 certified, fully compliand with the ISO 11898 CAN standard
- 0.15″ 16-pin SOIC package
- High-speed, low-power isolated CAN transciever
- Isolation voltage of 2.5kVRMS per VDE V 0884-10
- Working voltage of 600VRMS per VDE V 0884-10
- Thermal shutdown protection
- No carrier or clock for low emissions and EMI susceptibility
- UL 1577 recognised, VDE V 0884-10 certified, fully compliand with the ISO 11898 CAN standard
- 0.3″ 16-pin SOIC package
- NP0 (C0G) Chip ceramic capacitor with negative TC
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- MLCC Capacitor for RF and Microwave communication
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- MLCC high power, low capacitance variation with voltage capacitors
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- High quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- High quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Low inductance capacitors for high energy transfer
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 2.5% at 1KHz
- Insulation resistance of 20°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less