Core Sensors CS50 Series

The CS50 non-incendive pressure transducer from Core Sensors is a high-strength sensor designed for use in hazardous environments with various approvals and certifications. Available with pressure ranges from 50 PSI up to 30,000 PSI with an accuracy of ≤±0.25% BFSL. The CS50 has a selection of electrical output options, as well as a choice of process connections and wetted materials available with an operating temperature range of -40°C to +80°C and a media temperature range of -40 to +125°C. The Robust design and variety of configurable options make the CS50 series a versatile pressure transducer designed to operate in some of the harshest conditions. Utilising an all welded stainless steel one-piece diaphragm with no internal O-rings or welds, the series also offers a minimum ingress protection of IP65. The CS50 is an excellent solution for applications such as natural gas compression, hydrogen compression and storage, and process control instrumentation.

In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS50 non-incendive pressure transducer is offered with an integral Turck Mini-Fast electrical connection. When combined with a Turck cordset (with ITC rated cable) and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

*Core Sensors recommends confirming hazardous location installation requirements with your local inspector as each installation is unique.

• Non-incendive pressure transducer
• Pressure ranges available from 50 PSI to 30,000 PSI
• Accuracy of ≤±0.25% BFSL at 25°C
• Stability of ≤±0.25% of FS (1 year)
• Pressure cycles of 100 million
• Overpressure of 2x minimum
• Burst pressure of 5x or 60,000 PSI (whichever is less)
• Various electrical output option (see tables below for more details)
• Operating temperature range −40°C to +80°C
• Media temperature range of -40 to +125°C
• Reverse polarity and EMI protection
• IP65 minimum rated
• One piece diaphragm design with no internal O-rings or welds
• Various wetted materials available in 316L SS, 17-4PH, Hastelloy C276 (special order item) and Inconel 718 (special order item)
• Please contact us for custom designs

Approvals/Certifications for the Core CS50 series include:

• CSA Class I, Division 2 Groups A,BC,D T4
• ANSI/UL 122701 Single Seal
• ABS (American Bureau of Shipping)
• CE

Typical applications for the CS50 non-incendive pressure transducer series include:

• Hydrogen compression & storage
• Natural gas compression
• Oil exploration
• Process control

Image

Text

Caution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.

Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.