+44 (0) 1342 330 470

Sensors

Cell Guard Development Kit

In order to quickly plug in and evaluate your Cell Guard sensor, use this Development Board which has all the necessary cables to plug into a CAN adaptor. Includes:

Cell Guard Development Board
Power Supply
Sensor Cables
DB9 Cable

Cell Guard Sensor not included

Metis Engineering Cell Guard

Cell Guard is a CAN-based environmental sensor for use with Battery Packs in Energy Storage Systems and Electric Vehicles. It measures absolute pressure, air temperature, VOCs, absolute humidity, relative humidity, dew point temperature, and shock load and duration. For quick desktop analysis, use alongside the Cell Guard Development Kit.

Isabellenhütte IVT-S series

Current & voltage measurement sensor
Current range up to ±2,500A
Voltage range up to ±1,200V (Extended)
Communication based on CANbus 2.0 & DBC
Accuracy of ±0.4% of reading
Temperature range from -40°C to +105°C

Isabellenhütte IVT 3 Base

Current measurement sensor (ASIL C)
Current measurement up to 4,000A (Ext)
Temperature Measurement
Communication based on CAN 2.0B with DBC
Total accuracy of ±0.4% of rdg. +0.1A
Supply voltage 12V/24V**
Temperature range from -40°C to +125°C

Isabellenhütte IVT 3 Pro

Current measurement sensor (ASIL C)
3V or 6V measurement channels (ASIL B)
Active insulation monitoring (QM)
Temperature measurement
Current measurement up to 4,000A (Ext)
Voltage measurement up to 1,250V (Ext)
Temperature range from -40°C to +125°C

Core Sensors CS-SM Series

Steel mill pressure transducer
Pressures up to 350 Bar
Accuracy down to ≤±0.25% BFSL
Pressure cycles of >100 million
Burst pressure of 10X or 20,000 PSI (whichever is less)
IP69 protection against high pressure washdown
Integral snubber protects against pressure transients

Core Sensors CS10 Series

Industrial pressure transducer
Pressure ranges from vacuum up to 45,000 PSI
Accuracy down to ≤ ±0.25% BFSL
Stability (1 year) of ≤ ±0.25% of FS
Overpressure of 2x minimum
Temperature range from -40°C to +85°C
Media Temperature from -40°C to +120°C

Core Sensors CS11 Series

Compact media isolated pressure sensor
Pressure ranges from 0-2 up to 2,000 PSI
Accuracy as low as ≤ ±0.25% BFSL
Stability of ≤ ±0.2% of FS (1 year)
Pressure cycles of 10 million
Overpressure of 2x minimum
Burst pressure of 5x or 4,000 PSI

Core Sensors CS12 Series

Submersible pressure transducer
Pressure ranges from 1 to 100 PSI
Accuracy down to ≤±0.25% BFSL
Stability (1 year) of ≤±0.25% of FS
Pressure cycles of 50 million
Overpressure of 2x minimum
Burst pressure of 5x or 500 PSI

Core Sensors CS14 Series

Wet/wet differential pressure transducer
Differential pressure ranges up to 300 PSI
Line pressure up to 500 PSI
Accuracy of ≤±0.25% BFSL at 25°C
Stability of ≤±0.25% of FS
Pressure cycles of 4 million
Overpressure of 2x or 500 PSI

Core Sensors CS15 Series

Non-Clogging submersible pressure transducer
Pressure ranges from 2 PSI to 50 PSI
Flush diaphragm prevents clogging
Hastelloy C276 diaphragm material
IP68 rated
Operating temperature of -40 to +85°C
Compensated temperatures from 0 to +55°C

Core Sensors CS20 Series

Industrial temperature transmitter
RTD sensor type, PT100, Class B
Media temperature range of -40°C up to +200°C *
Operating temperature range of -40°C up to +85°C
Total error at RT & FS of ≤±1%
Maximum pressure of 5,000 PSI
Amplified 4-20mA or 1-5V output signal

Core Sensors CS50 Series

Non-incendive pressure transducer
Pressure ranges from 50 PSI to 30,000 PSI
Accuracy of ≤±0.25% BFSL at 25°C
Stability of ≤±0.25% of FS
Pressure cycles of 100 million
Overpressure of 2x minimum
Burst pressure of 5x or 60,000 PSI

Core Sensors CS51 Series

Non-incendive low pressure transducer
Pressure ranges from 1 PSI up to 49 PSI
Temperature range from −20°C up to +80°C *
Accuracy of ≤±0.25% BFSL at 25°C **
Stability of ≤±0.25% of FS (1 year)
Pressure cycles of 100 million
Overpressure of 2x minimum

Core Sensors CS54 Series

Non-Incendive Differential Pressure Transducer
Differential pressure up to 50 PSI
Line pressure up to 500 PSI
Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
Overpressure of 2X or 500 PSI (whichever is less)
Temperature range −40°C to +80°C
Media temperature of -40 to +125°C

Core Sensors CS60 Series

Explosion-Proof Pressure Transducer
Pressure ranges from 50 PSI to 30,000 PSI
One piece diaphragm design – No internal O-rings or welds
Factory sealed stainless steel case – Withstands harsh environments
Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
Pressure cycles of 100 million
Overpressure of 2x minimum

Cell Guard Development Kit

In order to quickly plug in and evaluate your Cell Guard sensor, use this Development Board which has all the necessary cables to plug into a CAN adaptor. Includes:

Cell Guard Development Board
Power Supply
Sensor Cables
DB9 Cable

Cell Guard Sensor not included

Metis Engineering Cell Guard

Cell Guard is a CAN-based environmental sensor for use with Battery Packs in Energy Storage Systems and Electric Vehicles. It measures absolute pressure, air temperature, VOCs, absolute humidity, relative humidity, dew point temperature, and shock load and duration. For quick desktop analysis, use alongside the Cell Guard Development Kit.

Isabellenhütte IVT-S series

Current & voltage measurement sensor
Current range up to ±2,500A
Voltage range up to ±1,200V (Extended)
Communication based on CANbus 2.0 & DBC
Accuracy of ±0.4% of reading
Temperature range from -40°C to +105°C

Isabellenhütte IVT 3 Base

Current measurement sensor (ASIL C)
Current measurement up to 4,000A (Ext)
Temperature Measurement
Communication based on CAN 2.0B with DBC
Total accuracy of ±0.4% of rdg. +0.1A
Supply voltage 12V/24V**
Temperature range from -40°C to +125°C

Isabellenhütte IVT 3 Pro

Current measurement sensor (ASIL C)
3V or 6V measurement channels (ASIL B)
Active insulation monitoring (QM)
Temperature measurement
Current measurement up to 4,000A (Ext)
Voltage measurement up to 1,250V (Ext)
Temperature range from -40°C to +125°C

Core Sensors CS-SM Series

Steel mill pressure transducer
Pressures up to 350 Bar
Accuracy down to ≤±0.25% BFSL
Pressure cycles of >100 million
Burst pressure of 10X or 20,000 PSI (whichever is less)
IP69 protection against high pressure washdown
Integral snubber protects against pressure transients

Core Sensors CS10 Series

Industrial pressure transducer
Pressure ranges from vacuum up to 45,000 PSI
Accuracy down to ≤ ±0.25% BFSL
Stability (1 year) of ≤ ±0.25% of FS
Overpressure of 2x minimum
Temperature range from -40°C to +85°C
Media Temperature from -40°C to +120°C

Core Sensors CS11 Series

Compact media isolated pressure sensor
Pressure ranges from 0-2 up to 2,000 PSI
Accuracy as low as ≤ ±0.25% BFSL
Stability of ≤ ±0.2% of FS (1 year)
Pressure cycles of 10 million
Overpressure of 2x minimum
Burst pressure of 5x or 4,000 PSI

Core Sensors CS12 Series

Submersible pressure transducer
Pressure ranges from 1 to 100 PSI
Accuracy down to ≤±0.25% BFSL
Stability (1 year) of ≤±0.25% of FS
Pressure cycles of 50 million
Overpressure of 2x minimum
Burst pressure of 5x or 500 PSI

Core Sensors CS14 Series

Wet/wet differential pressure transducer
Differential pressure ranges up to 300 PSI
Line pressure up to 500 PSI
Accuracy of ≤±0.25% BFSL at 25°C
Stability of ≤±0.25% of FS
Pressure cycles of 4 million
Overpressure of 2x or 500 PSI

Core Sensors CS15 Series

Non-Clogging submersible pressure transducer
Pressure ranges from 2 PSI to 50 PSI
Flush diaphragm prevents clogging
Hastelloy C276 diaphragm material
IP68 rated
Operating temperature of -40 to +85°C
Compensated temperatures from 0 to +55°C

Core Sensors CS20 Series

Industrial temperature transmitter
RTD sensor type, PT100, Class B
Media temperature range of -40°C up to +200°C *
Operating temperature range of -40°C up to +85°C
Total error at RT & FS of ≤±1%
Maximum pressure of 5,000 PSI
Amplified 4-20mA or 1-5V output signal

Core Sensors CS50 Series

Non-incendive pressure transducer
Pressure ranges from 50 PSI to 30,000 PSI
Accuracy of ≤±0.25% BFSL at 25°C
Stability of ≤±0.25% of FS
Pressure cycles of 100 million
Overpressure of 2x minimum
Burst pressure of 5x or 60,000 PSI

Core Sensors CS51 Series

Non-incendive low pressure transducer
Pressure ranges from 1 PSI up to 49 PSI
Temperature range from −20°C up to +80°C *
Accuracy of ≤±0.25% BFSL at 25°C **
Stability of ≤±0.25% of FS (1 year)
Pressure cycles of 100 million
Overpressure of 2x minimum

Core Sensors CS54 Series

Non-Incendive Differential Pressure Transducer
Differential pressure up to 50 PSI
Line pressure up to 500 PSI
Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
Overpressure of 2X or 500 PSI (whichever is less)
Temperature range −40°C to +80°C
Media temperature of -40 to +125°C

Core Sensors CS60 Series

Explosion-Proof Pressure Transducer
Pressure ranges from 50 PSI to 30,000 PSI
One piece diaphragm design – No internal O-rings or welds
Factory sealed stainless steel case – Withstands harsh environments
Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
Pressure cycles of 100 million
Overpressure of 2x minimum

Featured products

Coto RedRock TMR Digital Push-Pull Magnetic Sensor Switch

Coto RR123-1H02-612 Series

TMR digital push-pull magnetic sensor
Lower power consumption of 20nA
Omnipolar push-pull response
Supply voltage range from 1.0V to 3.6V
Temperature range of -40°C and +85°
LGA-4 package size

Merit Sensor HTS Series

Surface mountable analog and digital pressure sensor
Pressure ranges from 1 to 100 psi
Absolute or Gauge options available
Temperature range −40°C to +125°C
Compatible with wet, corrosive media

Cell Guard Development Kit

In order to quickly plug in and evaluate your Cell Guard sensor, use this Development Board which has all the necessary cables to plug into a CAN adaptor.

Includes:

Cell Guard Development Board
Power Supply
Sensor Cables
DB9 Cable

Cell Guard Sensor not included

Metis Engineering Cell Guard

Cell Guard is a CAN-based environmental sensor for use with Battery Packs in Energy Storage Systems and Electric Vehicles. It measures absolute pressure, air temperature, VOCs, absolute humidity, relative humidity, dew point temperature, and shock load and duration.

For quick desktop analysis, use alongside the Cell Guard Development Kit.

Manufacturers

Looking for Sensors?

The below manufacturers are all of our authorised partners that produce Sensors or related products.

Coto Technology

Metis Engineering Ltd

Newtek Sensor Solutions

Stellar Technology

Sensors

We offer a broad selection of sensors from a number of different industry leading manufacturers. Many of our sensors are designed for use in a variety of industries including Automotive, Medical, Aerospace, Oil & Gas and other harsh environment applications. Our range of sensors available include:

Temperature Sensors
Pressure Sensors
Magnetic Sensors
Load Cells
Float & Flow Switches

From standard off-the-shelf products to customised sensors, we can work with you and our authorised partners to offer the right solution suited to your requirements.

Looking for that extended pressure range, greater temperature rating or a different connector fitting? Need something a little different from the standard products below? Contact us now with your requirement.