![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.com/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
English
German
EnglishCustom (1Ω - 1.1kΩ) series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat and narrow type metal clad wire wound resistor
- Cement or silicone filling material with an extruded aluminium housing
- 300mm flying leads
- Excellent heat dissipation
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
- Short time overload of 5 x power rating is 5 seconds
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Narrow and Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRN Series
