SRT CRA 1216H

The CRA 1216H trimmable chip resistor series from SRT Resistor Technology offers a resistance range from 1Ω up to 10MΩ, power rating of 0.4W and voltage rating of 200V trimmed or 600V untrimmed (trimming ratios 8/single cut), all in a small 1216 surface mount package. By utilising SRT’s thick film resistor technology, they are able to offer low tolerances down to ±5.0% and TCR as low as ±50 ppm/°C (between 10Ω and 10MΩ). The CRA 1216H resistor series is suitable for laser and air-abrasive trimming, and offers Nickel-barrier/matte-tinned, glass passivated contact areas suitable for soldering. These resistors contain no organics, making them suitable for high vacuum applications.

• Trimmable thick film chip resistor
• Available in any resistance between 1Ω and 10MΩ
• 1216 package
• Power rating of 0.4W at +70°C
• Voltage rating of 200V trimmed or 600V untrimmed (trimming ratios 8/single cut)
• Tolerances as low as ±5.0% over the resistance range of 10Ω up to 10MΩ
• TCR as low as ±50 ppm/°C over the resistance range of 10Ω to 10MΩ
• Temperature range from -55°C up to +155°C
• Suitable for laser and air-abrasive trimming
• High trimming ratios by special geometries
• Nickel-barrier/matte-tinned, glass passivated contact areas for soldering
• No organics

Non-symmetric tolerances are also available (e.g. -0/+20%), please contact us for more information.

The below table gives full specifications for each resistor model available including the CRA 1216H series:

¹⁾ Detailed information on request
²⁾ TC50: Temperature range +25°C…+85°C; TK50 not in the resistance range<100R
³⁾Continuous operating voltage U=√(P*R)