+44 (0) 1342 330 470

600W series

Powertron FHR 2-80110 Series

Metal clad precision power resistor
Flat type surface-mount design
Resistance range from 0.001Ω to 500Ω
Tolerance from ±0.5% or ±5%
TCR of <±50 ppm/°C
Power rating of 600W on a suitable heat sink
Temperature range from -40°C to +130°C

RARA IRM600

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 94Ω
Power rating of up to 600W (on a heat sink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULM Series

RARA IRV600

Metal clad wire wound resistor
Option of flying leads, parallel or series connections
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Cement moulding with an extruded aluminium housing
Short time overload of 10 x power rating is 5 seconds

RARA ULM600

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 94Ω
Power rating of up to 600W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULV600

Metal clad wire wound resistor
Rated power 600W(Heatsink) / 330W (In air)
UL approved
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Option of flying leads, parallel or series connections

Powertron FHR 2-80110 Series

Metal clad precision power resistor
Flat type surface-mount design
Resistance range from 0.001Ω to 500Ω
Tolerance from ±0.5% or ±5%
TCR of <±50 ppm/°C
Power rating of 600W on a suitable heat sink
Temperature range from -40°C to +130°C

RARA IRM600

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 94Ω
Power rating of up to 600W (on a heat sink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULM Series

RARA IRV600

Metal clad wire wound resistor
Option of flying leads, parallel or series connections
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Cement moulding with an extruded aluminium housing
Short time overload of 10 x power rating is 5 seconds

RARA ULM600

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 94Ω
Power rating of up to 600W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULV600

Metal clad wire wound resistor
Rated power 600W(Heatsink) / 330W (In air)
UL approved
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Option of flying leads, parallel or series connections