![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.com/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
English
German
English100W series
- TO-247 style Kool-Pak® power through-hole resistor
- Heat sink mountable design featuring an exposed ceramic heat dissipating mounting surface
- Non-inductive design
- Constructed with Caddock’s Micronox® resistance film technology
- Maximum voltage rating is limited by the power
- Operation up to +175°C case temperature
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Flat and narrow type metal clad wire wound resistor
- Cement or silicone filling material with an extruded aluminium housing
- 300mm flying leads
- Excellent heat dissipation
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
- Short time overload of 5 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium vertical housing
- Short time overload of 10 x power rating is 5 seconds
- 4-terminal shunt resistor
- Resistance options of 0.2mΩ and 1mΩ
- Tolerances of ±0.05% to ±1%
- TCR of ±10 ppm/°C
- Power rating of 100W (on a suitable heat sink)
- Temperature range from -55°C to +100°C
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- UL approved
- Short time overload of 10 x power rating is 5 seconds
- Narrow and Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRN Series
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium vertical housing
- UL approved
- Short time overload of 10 x power rating is 5 seconds
- Surface-mount high power thin film chip terminator
- Rated operating temperature of +100°C at terminal
- Wrap around terminals for easy and reliable soldering
- Aluminum nitride substrate
- Efficient heat dissipation
