100MΩ series
- High resistance precision flip-chip surface-mount resistor
- Designed for use in extremely low signal detection / amplification circuits
- Solderable metallised termination pads on the same side as the resistive element with a bare ceramic back surface
- Maximum chip temperature of +85°C
- Temperature range of -40°C to +85°C
- Precision power film radial leaded through-hole resistor
- Non-inductive with expanded resistance range
- Maximum working voltage of 400V
- Compact rectangular package with standard lead spacing
- Constructed with Caddock’s Micronox® resistance films fired onto a solid ceramic substrate
- Extended life stability is typically better than 0.1% per 1,000 hours
- Temperature range from -40°C up to +150°C
- Ultra-stable radial leaded film through-hole resistor sets
- Sets are available with either 3 or 5 selected USF300 series resistors (model dependent)
- Voltage coefficient as low as 0.005 ppm/V per resistor set (model dependent)
- Ceramic package provides cool operation
- Utilising Caddock’s proprietary resistance film systems
- Available in 30MΩ, 50MΩ and 100MΩ sets
- Multiple USFS selected resistor sets can be used in series to achieve higher total resistances and higher voltage ratings
- Resistance transfer standard for calibrating standard resistors
- Resistance range from 1Ω up to 100MΩ
- Accuracy of ±10ppm, ±20ppm or ±50ppm
- TCR of ±1 ppm/°C, ±5 ppm/°C or ±10 ppm/°C
- Power rating of 0.01W (per element)
- Consists of 10 nominal value resistors
- Extremely stable primary standard resistor
- Resistance range from 0.001Ω to 100MΩ
- Accuracy from ±5 ppm to ±100 ppm
- TCR from ±1 ppm/°C to ±10 ppm/°C
- Power rating of 0.01W, 0.1W or 0.5W
- Long-term stability of resistance from ±5 ppm/year