+44 (0) 1342 330 470

Test and Measurement

Services

Range of standard resistors for calibration purposes from Alpha Electronics and Isabellenhütte.

Vast selection of precision and ultra-precision resistors, current sensing shunts and low ohmic resistors and power resistors in various through-hole and surface-mount packages in virtually any resistance value from Alpha Electronics, Caddock, General Resistance, Isabellenhütte, Riedon, Susumu and Vishay Foil Resistors.

Range of NTC and PTC thermistors and inrush current limiters from Ametherm.

High quality, high voltage relays handling up to 15kV from Cynergy3.

Data acquisition modules from DGH with number of analog and digital input and output options, offering possibility to easily set up a customised plug-and-play data acquisition system.

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Robust, high quality general purpose and precision load cells in range of packages by Lord Sensing Stellar Technology.

Variety of magnetic sensors and digital isolators from NVE Corporation based on their patented spintronic GMR technology.

Core Sensors CS12 Series

Submersible pressure transducer
Pressure ranges from 1 to 100 PSI
Accuracy down to ≤±0.25% BFSL
Stability (1 year) of ≤±0.25% of FS
Pressure cycles of 50 million
Overpressure of 2x minimum
Burst pressure of 5x or 500 PSI

Core Sensors CS15 Series

Non-Clogging submersible pressure transducer
Pressure ranges from 2 PSI to 50 PSI
Flush diaphragm prevents clogging
Hastelloy C276 diaphragm material
IP68 rated
Operating temperature of -40 to +85°C
Compensated temperatures from 0 to +55°C

Core Sensors CS20 Series

Industrial temperature transmitter
RTD sensor type, PT100, Class B
Media temperature range of -40°C up to +200°C *
Operating temperature range of -40°C up to +85°C
Total error at RT & FS of ≤±1%
Maximum pressure of 5,000 PSI
Amplified 4-20mA or 1-5V output signal

Core Sensors CS50 Series

Non-incendive pressure transducer
Pressure ranges from 50 PSI to 30,000 PSI
Accuracy of ≤±0.25% BFSL at 25°C
Stability of ≤±0.25% of FS
Pressure cycles of 100 million
Overpressure of 2x minimum
Burst pressure of 5x or 60,000 PSI

Core Sensors CS51 Series

Non-incendive low pressure transducer
Pressure ranges from 1 PSI up to 49 PSI
Temperature range from −20°C up to +80°C *
Accuracy of ≤±0.25% BFSL at 25°C **
Stability of ≤±0.25% of FS (1 year)
Pressure cycles of 100 million
Overpressure of 2x minimum

Core Sensors CS54 Series

Non-Incendive Differential Pressure Transducer
Differential pressure up to 50 PSI
Line pressure up to 500 PSI
Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
Overpressure of 2X or 500 PSI (whichever is less)
Temperature range −40°C to +80°C
Media temperature of -40 to +125°C

Core Sensors CS60 Series

Explosion-Proof Pressure Transducer
Pressure ranges from 50 PSI to 30,000 PSI
One piece diaphragm design – No internal O-rings or welds
Factory sealed stainless steel case – Withstands harsh environments
Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
Pressure cycles of 100 million
Overpressure of 2x minimum

CotoMOS® C236S

High-current MOSFET relay
Load Voltage: 60V
Load Current: 2.5A
Low On-Resistance: 0.06Ω Nominal
Output Capacitance: 150pF Typical
High-Reliability Solid State Design

Coto RR122-1A52/1A53 Series

TMR digital push-pull magnetic sensor
Operate sensitivity of 9 G (typical)
Average supply current of 1.3μA at 3V (typical)
Supply voltage range of 1.7V to 5.5V
Omnipolar push-pull response
Operating frequency of 250Hz
SOT-23-3 (511) package

Coto RR122-1E72/1E73 Series

TMR digital push-pull magnetic sensor
Operate sensitivity of 15 G (typical)
Average supply current of 12μA at 3V (typical)
Supply voltage range of 1.7V to 5.5V
Omnipolar push-pull response
Operating frequency of 2500Hz
SOT-23-3 (511) package

Coto RR122-3C62/3C63 Series

TMR digital push-pull magnetic sensor
Operate sensitivity of 10 G (typical)
Average supply current of 1.9μA at 3V (typical)
Supply voltage range of 1.7V to 5.5V
Bipolar Latching push-pull response
Operating frequency of 500Hz
SOT-23-3 (511) package

Coto RR123-1H02-612 Series

TMR digital push-pull magnetic sensor
Lower power consumption of 20nA
Omnipolar push-pull response
Supply voltage range from 1.0V to 3.6V
Temperature range of -40°C and +85°
LGA-4 package size

DGH D1100 Sensor to Computer Interface Voltage Input Module

8-bit ADC, 8 conversions per second
Accuracy: ±0.02% of FS maximum
Resolution: 0.01% of FS (4 digits)
Common mode rejection: 100dB at 50/60Hz
Zero drift: ±1 count maximum (autozero)
Voltage drop: ±0.1V maximum
Input impedance of ≤±1V input =100MΩ minimum and ≥±5V input =1MΩ minimum
Temperature range of -25°C to +70°C

DGH D1100M Modbus with Voltage Input Module Series

8 conversions per second
Accuracy: ±0.02% of FS maximum
Resolution: 0.01% of FS (4 digits)
Common mode rejection: 100dB at 50/60Hz
Zero drift: ±1 count maximum (autozero)
Voltage drop: ±0.1V maximum
Input impedance of ≤±1V input =100MΩ minimum and ≥±5V input =1MΩ minimum
Temperature range of -25°C to +70°C

DGH D1200 Sensor to Computer Interface Current Input Module

8-bit ADC, 8 conversions per second
Accuracy: ±0.02% of FS maximum (0.04% of FS for 4-20mA option)
Resolution: 0.01% of FS (4 digits) (0.04% of FS for 4-20mA option)
Common mode rejection: 100dB at 50/60Hz
Zero drift: ±1 count maximum (autozero)
Voltage drop: ±0.1V maximum
Temperature range of -25°C to +70°C

DGH D1200M Modbus with Current Input Module Series

8 conversions per second
Accuracy: ±0.02% of FS maximum (0.04% of FS for 4-20mA option)
Resolution: 0.01% of FS (4 digits) (0.04% of FS for 4-20mA option)
Common mode rejection: 100dB at 50/60Hz
Zero drift: ±1 count maximum (autozero)
Voltage drop: ±0.1V maximum
Temperature range of -25°C to +70°C