![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.com/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
English
German
EnglishScientific Instrumentation
A wide range of precision and ultra-precision resistors from Alpha Electronics, General Resistance and Susumu, power resistors from Caddock and current sensing resistors and shunts from Isabellenhütte in a variety surface-mount and through-hole packages and virtually any resistance value.
Variety of NTC and PTC thermistors, thermal probes and inrush current limiters from Ametherm.
A range of digital isolators from NVE Corporation, based on their patented spintronic GMR technology.
- Ultra-stable radial leaded film through-hole resistors
- Maximum working voltage of 2.5kV
- Ceramic package provides cool operation
- Utilising Caddock’s proprietary resistance film systems
- Available in standard resistance values most commonly used in precision analog design
- Zero nominal TCR
- Temperature range from -40°C up to +85°C
- Ultra-stable radial leaded film through-hole resistor sets
- Sets are available with either 3 or 5 selected USF300 series resistors (model dependent)
- Voltage coefficient as low as 0.005 ppm/V per resistor set (model dependent)
- Ceramic package provides cool operation
- Utilising Caddock’s proprietary resistance film systems
- Available in 30MΩ, 50MΩ and 100MΩ sets
- Multiple USFS selected resistor sets can be used in series to achieve higher total resistances and higher voltage ratings
- Non-Clogging submersible pressure transducer
- Pressure ranges from 2 PSI to 50 PSI
- Flush diaphragm prevents clogging
- Hastelloy C276 diaphragm material
- IP68 rated
- Operating temperature of -40 to +85°C
- Compensated temperatures from 0 to +55°C
- Industrial temperature transmitter
- RTD sensor type, PT100, Class B
- Media temperature range of -40°C up to +200°C *
- Operating temperature range of -40°C up to +85°C
- Total error at RT & FS of ≤±1%
- Maximum pressure of 5,000 PSI
- Amplified 4-20mA or 1-5V output signal
- Non-incendive pressure transducer
- Pressure ranges from 50 PSI to 30,000 PSI
- Accuracy of ≤±0.25% BFSL at 25°C
- Stability of ≤±0.25% of FS
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- Burst pressure of 5x or 60,000 PSI
- Non-incendive low pressure transducer
- Pressure ranges from 1 PSI up to 49 PSI
- Temperature range from −20°C up to +80°C *
- Accuracy of ≤±0.25% BFSL at 25°C **
- Stability of ≤±0.25% of FS (1 year)
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- Non-Incendive Differential Pressure Transducer
- Differential pressure up to 50 PSI
- Line pressure up to 500 PSI
- Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
- Overpressure of 2X or 500 PSI (whichever is less)
- Temperature range −40°C to +80°C
- Media temperature of -40 to +125°C
- TMR digital push-pull magnetic sensor
- Operate sensitivity of 15 G (typical)
- Average supply current of 12μA at 3V (typical)
- Supply voltage range of 1.7V to 5.5V
- Omnipolar push-pull response
- Operating frequency of 2500Hz
- SOT-23-3 (511) package
- TMR digital push-pull magnetic sensor
- Operate sensitivity of 10 G (typical)
- Average supply current of 1.9μA at 3V (typical)
- Supply voltage range of 1.7V to 5.5V
- Bipolar Latching push-pull response
- Operating frequency of 500Hz
- SOT-23-3 (511) package
- A-H1 current sense resistor
- 4-terminal through-hole design
- Resistance range from 0.001Ω to 100Ω
- Tolerance of ±0.1% or ±1%
- TCR of <±30 ppm/°C
- Power rating of 10W on a suitable heat sink
- Temperature range from -55°C to +140°C
- Current sense resistor
- 4-terminal through-hole design
- Resistance range from 0.001Ω to 100Ω
- Tolerance of ±0.1% or ±1%
- TCR of <±30 ppm/°C
- Power rating of 10W on a suitable heat sink
- Temperature range from -55°C to +140°C
- Current sensing resistor
- 4-terminal through-hole design
- Resistance range from 0.002Ω to 5Ω
- Tolerance of ±0.1% or ±1%
- TCR of <±3 ppm/°C or <±10 ppm/°C (+20°C to +60°C)
- Power rating 10W on a suitable heat sink
- Temperature range from -55°C to +140°C
- Current sensing resistor
- 4-terminal through-hole design
- Resistance range from 0.002Ω to 1Ω
- Tolerance of ±0.1% or ±1%
- TCR of <±3 ppm/°C or <±10 ppm/°C (+20°C to +60°C)
- Power rating 10W on a suitable heat sink
- Temperature range from -55°C to +140°C
- Current sensing resistor
- 4-terminal surface-mount design
- Resistance range from 0.0003Ω to 0.0005Ω
- Tolerance ±5.0%
- TCR of <±20 ppm/°C
- Power rating of 3W
- Temperature range from -55°C to +140°C
- Current sensing resistor
- 3812 chip size
- Resistance range from 0.002Ω to 0.025Ω
- Tolerances from ±1%
- TCR from ±100 ppm/°C
- Power rating of 2W (at 120°C)
- Temperature range from -55°C to +170°C
- Current sensing resistor
- 4-terminal surface-mount 1216 package
- Resistance range from 0.0003Ω to 0.003Ω
- Tolerance ±1.0% or ±5.0%
- TCR value <50 ppm/°C
- Power rating 10W (at +70°C)
- Temperature range from -65°C to +170°C
