+44 (0) 1342 330 470

Renewables

RARA ULM1000

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 140Ω
Power rating of up to 1000W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM1200

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 175Ω
Power rating of up to 1200W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM1600

Metal clad wire wound resistor
Resistance options from 0.3Ω up to 88Ω
Power rating of up to 570W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2000

Metal clad wire wound resistor
Resistance options from 0.45Ω up to 133Ω
Power rating of up to 650W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2400

Metal clad wire wound resistor
Resistance options from 0.6Ω up to 144Ω
Power rating of up to 720W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2800

Metal clad wire wound resistor
Resistance options from 0.7Ω up to 135Ω
Power rating of up to 750W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULN50C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 420Ω
Power rating of 50W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULN100C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULN150C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULV60

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 5 x power rating is 5 seconds

RARA ULV80

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV100

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV120

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV150

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV200

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV300

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULM1000

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 140Ω
Power rating of up to 1000W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM1200

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 175Ω
Power rating of up to 1200W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM1600

Metal clad wire wound resistor
Resistance options from 0.3Ω up to 88Ω
Power rating of up to 570W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2000

Metal clad wire wound resistor
Resistance options from 0.45Ω up to 133Ω
Power rating of up to 650W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2400

Metal clad wire wound resistor
Resistance options from 0.6Ω up to 144Ω
Power rating of up to 720W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2800

Metal clad wire wound resistor
Resistance options from 0.7Ω up to 135Ω
Power rating of up to 750W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULN50C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 420Ω
Power rating of 50W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULN100C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULN150C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULV60

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 5 x power rating is 5 seconds

RARA ULV80

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV100

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV120

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV150

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV200

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV300

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

Resources

Coto Technology - Testing Reed Relays and Reed Switches for Reliability

Renewables

We have designed various sensors and components for some of the largest renewable energy companies around as well as also helped with small startup companies investigating Wind, Wave and Tidal renewable projects. Whether you need a sensor to monitor hydraulic spikes or a braking resistor to help with turbine dumped energy, we are here to help.