+44 (0) 1342 330 470

Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

RARA ULM1600

Metal clad wire wound resistor
Resistance options from 0.3Ω up to 88Ω
Power rating of up to 570W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2000

Metal clad wire wound resistor
Resistance options from 0.45Ω up to 133Ω
Power rating of up to 650W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2400

Metal clad wire wound resistor
Resistance options from 0.6Ω up to 144Ω
Power rating of up to 720W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2800

Metal clad wire wound resistor
Resistance options from 0.7Ω up to 135Ω
Power rating of up to 750W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULN50C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 420Ω
Power rating of 50W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULN100C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULN150C

Narrow and Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRN Series

RARA ULV60

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 5 x power rating is 5 seconds

RARA ULV80

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV100

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV120

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV150

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV200

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV300

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV400

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULV500

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium vertical housing
UL approved
Short time overload of 10 x power rating is 5 seconds