Military & Defense

RdF 26724 Series

Stikon® type J thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

Add to Compare

RdF 29230 Series

Surface platinum RTD temperature sensor
Temperature range -200°C to +260°C
Time constant of <0.3s on metal surfaces
100 ±0.12Ω or 1000 ±1.2Ω at 0°C (International Class B)
Long term stability <0.05°C per 5 years
2 or 3 wire configuration options available

Add to Compare

Datasheet

RdF 29309 Series

Surface platinum RTD temperature sensor
Temperature range -200°C to +260°C
Time constant of <0.3s on metal surfaces
100 ±0.12Ω or 1000 ±1.2Ω at 0°C (International Class B)
Long term stability <0.05°C per 5 years
4 Wire configuration

Add to Compare

Datasheet

SRT Microcéramique Chip Capacitors with Negative TC

NP0 (C0G) Chip ceramic capacitor with negative TC
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Frequency Capacitor Series

MLCC Capacitor for RF and Microwave communication
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Temperature NP0 Capacitor Series

High Temperature, ultra stable MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Temperature X7R Capacitor Series

High Temperature MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Voltage NP0 Capacitor Series (200V-1kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Voltage NP0 Capacitor Series (2kV-10kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique Low Inductance Capacitor Series

Low inductance capacitors for high energy transfer
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 2.5% at 1KHz
Insulation resistance of 20°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less

Add to Compare

SRT Microcéramique Low Voltage BX Capacitor Series (50-100V)

Stable ceramic capacitor
Better voltage behaviour compared to X7R dielectric
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique Low Voltage NP0 Capacitor Series (16-100V)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique Low Voltage X7R Capacitor Series (16-100V)

Stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

RdF 26724 Series

Stikon® type J thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 29230 Series

Surface platinum RTD temperature sensor
Temperature range -200°C to +260°C
Time constant of <0.3s on metal surfaces
100 ±0.12Ω or 1000 ±1.2Ω at 0°C (International Class B)
Long term stability <0.05°C per 5 years
2 or 3 wire configuration options available

RdF 29309 Series

Surface platinum RTD temperature sensor
Temperature range -200°C to +260°C
Time constant of <0.3s on metal surfaces
100 ±0.12Ω or 1000 ±1.2Ω at 0°C (International Class B)
Long term stability <0.05°C per 5 years
4 Wire configuration

SRT Microcéramique Chip Capacitors with Negative TC

NP0 (C0G) Chip ceramic capacitor with negative TC
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Frequency Capacitor Series

MLCC Capacitor for RF and Microwave communication
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Temperature NP0 Capacitor Series

High Temperature, ultra stable MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Temperature X7R Capacitor Series

High Temperature MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (200V-1kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (2kV-10kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Low Inductance Capacitor Series

Low inductance capacitors for high energy transfer
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 2.5% at 1KHz
Insulation resistance of 20°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less

SRT Microcéramique Low Voltage BX Capacitor Series (50-100V)

Stable ceramic capacitor
Better voltage behaviour compared to X7R dielectric
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Low Voltage NP0 Capacitor Series (16-100V)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Low Voltage X7R Capacitor Series (16-100V)

Stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Resources

Military & Defense

Selection of ‘EEE’ approved surface-mount current sensing resistors by Isabellenhütte and ultra-precision resistors from Vishay Foil Resistors
Selection of Military grade surface mount, high voltage chip resistors from Ohmcraft.

Cissoid’s range of semiconductors designed especially for high temperature applications and harsh environments.

‘EEE’ approved pressure sensors from Emerson Paine™.

Robust and accurate general purpose load cells from Lord Sensing Stellar Technology.

Thermocouple foil temperature sensors by RdF.

Aerospace

Audio

Energy

EV & Automotive

Healthcare & Medical

Industrial

Military & Defense

Oil & Gas

Renewables

Military & Defense

Resources

Military & Defense