+44 (0) 1342 330 470

Energy

Caddock TK233 Series

Precision radial leaded film through-hole resistor
Caddock’s non-inductive performance
Maximum working voltage of 300V
Compact rectangular package with standard lead spacing
Constructed with Caddock’s Tetrinox® resistance films
Long-term absolute stability typically better than ±0.05% per 2,000 hours
Temperature range from -40°C up to +150°C

Caddock TK729 Series

Precision radial leaded film through-hole resistor
Caddock’s non-inductive performance
Maximum working voltage of 200V
Compact rectangular package with standard lead spacing
Constructed with Caddock’s Tetrinox® resistance films
Long-term absolute stability typically better than ±0.05% per 2,000 hours
Temperature range from -40°C up to +150°C

Caddock TK733 Series

Precision radial leaded film through-hole resistor
Caddock’s non-inductive performance
Maximum working voltage of 300V
Compact rectangular package with standard lead spacing
Constructed with Caddock’s Tetrinox® resistance films
Long-term absolute stability typically better than ±0.05% per 2,000 hours
Temperature range from -40°C up to +150°C

Cissoid CHT-BG3M Series

High temperature voltage reference
Maximum output current of 3mA at +225°C
Quiescent current of 700µA
Validated at +225°C for 30,000 hours

Cissoid CHT-LDNS Series

High temperature, negative low-dropout linear voltage regulator
Maximum output current of 1A at +225°C
Quiescent current of 3mA
Validated at +225°C for 30,000 hours (and still on-going)

Cissoid CHT-LDOP Series

High temperature low-dropout linear voltage regulator
Maximum output current of 1A at +225°C
Quiescent current of 3mA
Validated at +225°C for 43,800 hours (and still on-going)

Cissoid CXT-741Gxx

High temperature logic gates
Exceeds AEC-Q100 Grade 0 requirements (qualification pending)
16mA output drive current
EDS: 2000V HBM or 200V MM
CMOS Low power consumption

Cissoid CXT-STA4919

High temperature adjustable linear voltage regulator
Exceeds AEC-Q100 Grade 0 requirements (qualification pending)
Quiescent current of 1.1mA
Chip-enable input signal allowing to place the circuit in low power, disable mode

Core Sensors CS15 Series

Non-Clogging submersible pressure transducer
Pressure ranges from 2 PSI to 50 PSI
Flush diaphragm prevents clogging
Hastelloy C276 diaphragm material
IP68 rated
Operating temperature of -40 to +85°C
Compensated temperatures from 0 to +55°C

Core Sensors CS20 Series

Industrial temperature transmitter
RTD sensor type, PT100, Class B
Media temperature range of -40°C up to +200°C *
Operating temperature range of -40°C up to +85°C
Total error at RT & FS of ≤±1%
Maximum pressure of 5,000 PSI
Amplified 4-20mA or 1-5V output signal

Core Sensors CS50 Series

Non-incendive pressure transducer
Pressure ranges from 50 PSI to 30,000 PSI
Accuracy of ≤±0.25% BFSL at 25°C
Stability of ≤±0.25% of FS
Pressure cycles of 100 million
Overpressure of 2x minimum
Burst pressure of 5x or 60,000 PSI

Core Sensors CS51 Series

Non-incendive low pressure transducer
Pressure ranges from 1 PSI up to 49 PSI
Temperature range from −20°C up to +80°C *
Accuracy of ≤±0.25% BFSL at 25°C **
Stability of ≤±0.25% of FS (1 year)
Pressure cycles of 100 million
Overpressure of 2x minimum

Core Sensors CS54 Series

Non-Incendive Differential Pressure Transducer
Differential pressure up to 50 PSI
Line pressure up to 500 PSI
Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
Overpressure of 2X or 500 PSI (whichever is less)
Temperature range −40°C to +80°C
Media temperature of -40 to +125°C

Core Sensors CS60 Series

Explosion-Proof Pressure Transducer
Pressure ranges from 50 PSI to 30,000 PSI
One piece diaphragm design – No internal O-rings or welds
Factory sealed stainless steel case – Withstands harsh environments
Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
Pressure cycles of 100 million
Overpressure of 2x minimum

Coto RR122-1A22/1A23 Series

TMR digital push-pull magnetic sensor
Operate sensitivity of 9 G (typical)
Average supply current of 135nA at 3V (typical)
Supply voltage range of 1.7V to 5.5V
Omnipolar push-pull response
Operating frequency of 10 Hz
SOT-23-3 (511) or LGA-4 (512) package

Emerson Paine™ 210-60-090 Series

Differential pressure transducer
Very low thermal sensitivity shift of ±0.01% of F.S. per°C
Small, lightweight manifold style mounting for easy installation
Temperature compensated design provides highly accurate pressure measurements
Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
Durable solution withstands harsh environments for long-lasting performance
Custom electrical connection and pressure port adaptors are available on request