Non Inductive series
- Metal clad thick film resistor
- Resistance range from 1kΩ to 2MΩ
- Max power rating of 15W
- Cement moulding within aluminium housing
- Short time overload of 2 x power rating is 5 seconds
- High stability at conventional power ratings
- Temperature range of -55°C up to +250°C
- Metal clad thick film resistor
- Resistance range from 1kΩ to 2MΩ
- Max power rating of 25W
- Cement moulding within aluminium housing
- Short time overload of 2 x power rating is 5 seconds
- High stability at conventional power ratings
- Temperature range of -55°C up to +250°C
- Metal clad wire wound economy resistor
- Inductive resistance between 0.1Ω and 270Ω
- Non-inductive resistance between 0.1Ω and 56Ω
- Power rating of 60W
- Insulation resistance of 20MΩ minimum
- Short time overload of 5 x power rating is 5 seconds
- Metal clad wire wound economy resistor
- Inductive resistance between 0.1Ω and 910Ω
- Non-inductive resistance between 0.1Ω and 110Ω
- Power rating of 80W
- Insulation resistance of 20MΩ minimum
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound economy resistor
- Inductive resistance between 0.1Ω and 1.3kΩ
- Non-inductive resistance between 0.1Ω and 300Ω
- Power rating of 120W
- Insulation resistance of 20MΩ minimum
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 5 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Option of flying leads (tab terminals are standard)
- Inductive or non-inductive design
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C
- Extruded aluminium horizontal housing
- Short time overload of 10 x power rating is 5 seconds
- Metal clad wire wound resistor
- Resistance options from 0.1Ω up to 94Ω
- Power rating of up to 600W (on a heat sink)
- Tolerance options between ±1% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULM Series
- Metal clad wire wound resistor
- Resistance options from 0.1Ω up to 112Ω
- Power rating of up to 800W (on a heat sink)
- Tolerance options between ±1% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULM