Battery-operated, wirelessly-connected devices are becoming increasingly pervasive in todayโs society.ย Driven forward by advancements in wireless and battery technologies, coupled with shrinking electronic components that consume less power, and cloud-based services ready to collect, analyze and disseminate data, these devices are commonly found in consumer, medical and wearable devices as well as in commercial, and industrial applications.
Whether the device is a wearable continuous glucose monitor (CGM), an ingestible or implantable medical device, or a smart home device, asset tracker or environmental monitor, all share the common requirement of small size, long life, reliability and ease of use. One of the major problems faced by designers of these products is powering on the device when needed.
Powering on an IoT device only when it is needed (or keeping it powered down before it is deployed) is vitally important because designers want to use the smallest, lowest cost battery possible.ย For this reason, extending battery life is always a design goal; battery drain must be minimized during use as well as before it has been powered on.
One popular example is the continuous glucose monitor (CGM) prescribed to a Type 1 or Type 2 diabetic. This device adheres to a patientโs body, continuously monitoring his/her glucose level.ย Resulting data is wirelessly transmitted to the patient, doctor and/or insulin pump.ย CGMโs must be very small, โwater proofโ, easy to attach and have a reasonably long life before they run out of battery power.ย
There are three basic options for powering on these devices at the point of use or deployment. For each of these options, essential variables for consideration are battery current drain, size, ingress protection and user friendliness.
The first โPower ONโ option is electromechanical or the common โswitch.โ This option is the means for powering on most battery-operated electronic devices such as laptops and phones. Although switches come in many forms, (e.g.; push button, slider or toggle) they operate on the same principle of opening and closing a mechanical contact to allow current to flow (when closed) or completely prevent it from flowing (when open).ย With regard to the first consideration of current drain, the electromechanical switch is highly efficient because it is a passive device which consumes no power.ย However, in terms of size, mechanical switches are a poor option, especially given the size constraints of many wearable, ingestible and implantable medical devices and other small IoT devices. In terms of ingress protection, (or need to have a device that is impermeable to water and humidity) mechanical switches are not the best option as designing a switch that can be mechanically moved by the user into on/off positions while maintaining impermeability is challenging. Lastly, the consideration of user friendliness, or ease of use, rates poorly with mechanical switches for two reasons โ first: since the user must actually take this step (and many need to be instructed to do so), the requirement for many devices is โout-of-the-boxย turn-onโ โย a clear conflict with manually operated switches. Secondly, a very small mechanical switch, necessitated by a very small device, could pose a problem for usersโ ability to actually move the switch to the ON position, thereby reducing usability. So, in summary, mechanical switches score highly in terms of current consumption but very low relative to ingress protection, size and ease of use.
Wireless poweron is the second option to analyze. Because the devices already have wireless capabilities to transmit data, designers could technically use that same wireless capability to power on a device from a mobile phone app. From an ingress protection standpoint, powering on wirelessly is rated very highly. And, from a size standpoint, powering on wirelessly also rates highly as there is nothing more to add to the device for this functionality. However, from a current drain standpoint, wireless power on scores extremely low because a wireless receiver inside the device must be powered on to receive a signal to power on. For this reason alone, wireless power on is rarely used for devices that have stringent battery life requirements.
The third option is the use of a magnetic sensor inside the device to initiate the power on function. In this case, a magnetic field is applied to the sensor to trigger the power on.ย The magnetic field is typically produced by a magnet that is located within the productโs packaging or in an auxiliary component to the device (such as an applicator for a CGM). The magnetic field can also be applied by the user swiping across the device with a hand held magnet. Magnetic sensing scores very highly for ingress protection (because it is a โcontact-lessโ method).
Magnetic sensing also scores very highly in ease of use โ especially when the magnet can be embedded in the device packaging (enabling โout-of-the-box power onโ) or in an auxiliary component to the device (e.g.; an applicator). Sometimes the device, itself, is designed as two components that must be connected together at the time of deployment.ย In terms of current drain and size, the desirability of magnetic sensing depends entirely on the magnetic sensing technology.ย Older, more traditional magnetic sensing technologies types were either small in size, but high in power consumption (Hall Effect) or large in size with zero power consumption (reed switches).ย However, many new devices are designed with a newer magnetic sensing technology called Tunneling Magnetoresistive (TMR) which offers both very small size (as small as an LGA-4) and extremely low power consumption, similar to the reed switch. In effect, TMR magnetic sensors offer the โbest of both worlds.โ
With the current onslaught of new devices designed to make life easier, safer, contact-less and/or operable remotely, electronic designers are having to adopt new technologies to keep up with the evolving requirements of battery-operated wearables, implantables, ingestibles and other IoT devices.ย In terms of best capabilities relative to small size, lower power consumption, ingress protection and ease of use, magnetic sensors โ and TMR sensor technology in particular โ are helping to make โimpossibleโ designs possible.
Caption (for above picture): The TMR Magnetic Sensor offers almost zero power consumption in an ultra-miniature package size; and its contactless โpower onโ capability promotes ease of use.
Established in 1917, Coto Technology (www.cotorelay.com) is a worldwide market leader in the design and manufacture of advanced, high-reliability switching and magnetic sensing solutions sold into the Medical, Automotive, Data Acquisition, Instrumentation, Process Control, Telecommunications, Automatic Test Equipment and Security markets. ย RedRockยฎ is a registered brand of Coto Technologyโs Sensor Product line.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
3rd Party Cookies
This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.
SalesIQ chat
PageSense
Keeping these cookies enabled helps us to improve our website.
Please enable Strictly Necessary Cookies first so that we can save your preferences!