+44 (0) 1342 330 470

UL

Underwriters Laboratories® Inc. (UL) is an independent product safety certification organization Based in Northbrook, Illinois.

UL develops standards and test procedures for products, materials, components, assemblies, tools and equipment, chiefly dealing with product safety.

UL does not “approve” products. Rather it evaluates products, components, materials and systems for compliance to specific requirements, and permits acceptable products to carry a UL certification mark, as long as they remain compliant with the standards.

RARA ULH100

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium horizontal housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULH100F

Precision shunt resistor
4-terminal metal-clad design
Resistance value of 1.3333mΩ
Rated current of 75A
Tolerance values of ±0.1, ±0.5% or ±1.0%
Rated voltage 100mV
UL Approved

RARA ULH120

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium horizontal housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULH150

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium horizontal housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULH200

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium horizontal housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULH200F

Precision shunt resistor
4-terminal metal-clad design
Resistance values between 0.4mΩ up to 1.3333mΩ
Rated currents from 100A up to 250A
Tolerance values of ±0.1, ±0.5% or ±1.0%
Rated voltage 100mV
UL Approved

RARA ULH300

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium horizontal housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULH300F

Precision shunt resistor
4-terminal metal-clad design
Resistance values between 0.1250mΩ up to 0.3333mΩ
Rated currents from 300A up to 500A
Tolerance values of ±0.1, ±0.5% or ±1.0%
Rated voltages of 50mV or 100mV
UL Approved

RARA ULH400

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium horizontal housing
UL approved
Short time overload of 10 x power rating is 5 seconds

RARA ULH500

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
UL approved
Extruded aluminium horizontal housing
Short time overload of 10 x power rating is 5 seconds

RARA ULM600

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 94Ω
Power rating of up to 600W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM800

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 112Ω
Power rating of up to 800W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM1000

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 140Ω
Power rating of up to 1000W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM1200

Metal clad wire wound resistor
Resistance options from 0.1Ω up to 175Ω
Power rating of up to 1200W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM1600

Metal clad wire wound resistor
Resistance options from 0.3Ω up to 88Ω
Power rating of up to 570W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM

RARA ULM2000

Metal clad wire wound resistor
Resistance options from 0.45Ω up to 133Ω
Power rating of up to 650W (on heatsink)
Tolerance options between ±1% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRM