+44 (0) 1342 330 470

CSA

Services

CSA International (Canadian Standards Association) is a member of the CSA Group that provides product testing and certification services for electrical, mechanical, plumbing, gas and a variety of other products.

CSA International certification marks indicate that a product, process or service has been tested to a Canadian or U.S. standard and it meets the requirements of an applicable CSA standard or another recognized document used as a basis for certification.

Weidmüller LSF-SMT 5.00/90 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 5.0mm to 35mm (depending on the number of poles required)
SMT solder connection with a solder pin length of 3.5mm
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMT 5.08/90 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 5.08mm to 35.56mm (depending on the number of poles required)
SMT solder connection with a solder pin length of 3.5mm
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMT 7.50/180 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 7.5mm to 52.5mm (depending on the number of poles required)
SMT solder connection with a solder pin length of 3.5mm
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMT 7.50/90 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 7.5mm to 52.5mm (depending on the number of poles required)
SMT solder connection with a solder pin length of 3.5mm
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LU 10.16/90 Series

PCB terminal connector
Rated current for minimum number of poles 76A (IEC) and 65A (UL)
Dimensions of L1 10.16mm to 91.44mm (depending on the number of poles required)
THT solder connection with a solder pin length of 4.5mm
Wire connection cross section from AWG 22 to AWG 8
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LUF 10.00/90V Series

PCB terminal connector
Rated current for minimum number of poles 76A (IEC) and 58A (UL)
Dimensions of L1 10mm to 110mm (depending on the number of poles required)
THT solder connection with a solder pin length of 5mm
Wire connection cross section from AWG 18 to AWG 6
Temperature range of −40°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LUF 15.00/90V Series

PCB terminal connector
Study, direct connection fro extreme current and voltage requirements
Rated current for minimum number of poles 68A (IEC) and 58A (UL)
Dimensions of L1 15mm to 105mm (depending on the number of poles required)
THT solder connection with a solder pin length of 5mm
Wire connection cross section from AWG 18 to AWG 4
Temperature range of −40°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LUFS 10.00/180V Series

PCB terminal connector
Rated current for minimum number of poles 76A (IEC) and 57A (UL)
Dimensions of L1 10mm to 110mm (depending on the number of poles required)
THT solder connection with a solder pin length of 5mm
Wire connection cross section from AWG 18 to AWG 4
Temperature range of −40°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LUFS 15.00/180V Series

PCB terminal connector
Rated current for minimum number of poles 76A (IEC) and 57A (UL)
Dimensions of L1 15mm to 105mm (depending on the number of poles required)
THT solder connection with a solder pin length of 5mm
Wire connection cross section from AWG 18 to AWG 4
Temperature range of −40°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LX 15.00/90 Series

PCB terminal connector
Rated current for minimum number of poles 101A (IEC) and 85A (UL)
Dimensions of L1 0mm to 135mm (depending on the number of poles required)
THT solder connection with a solder pin length of 4.5mm
Wire connection cross section from AWG 16 to AWG 4
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller S2C-SMT 3.50/180G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 13.4A (IEC) and 10A (UL)
Dimensions of L1 3.5mm to 59.5.5mm (depending on the number of poles required)
THT or THR solder connection with a solder pin length of 3.5mm
Temperature range −50°C to +105°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL 2.50/90G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 6A (IEC) and 5A (UL)
Dimensions of L1 2.5mm to 27.5mm (depending on the number of poles required)
THT solder connection with a solder pin length of 3.2mm
Temperature range −40°C to +105°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL 3.50/180G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 17A (IEC) and 10A (UL)
Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
THT solder connection with a solder pin length of 3.2mm
Temperature range −50°C to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL 5.08HC/180B Series

PCB terminal connector with male header
Rated current for minimum number of poles 24A (IEC) and 18.5A (UL)
Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
THT solder connection with a solder pin length of 3.2mm
Temperature range −50°C to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL-SMT 3.50/180G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 15A (IEC) and 10A (UL)
Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
Pin length of 3.2mm suitable for wave or reflow soldering
Temperature range −50°C to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL-SMT 3.50/90G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 15A (IEC) and 10A (UL)
Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
Pin length of 3.2mm suitable for wave or reflow soldering
Temperature range −50°C to +100°C
CSA and UL 1059 approved, IEC listed