+44 (0) 1342 330 470

CSA

Services

CSA International (Canadian Standards Association) is a member of the CSA Group that provides product testing and certification services for electrical, mechanical, plumbing, gas and a variety of other products.

CSA International certification marks indicate that a product, process or service has been tested to a Canadian or U.S. standard and it meets the requirements of an applicable CSA standard or another recognized document used as a basis for certification.

Weidmüller BLF 5.08HC/180 Series

High current female plug in connector
Rated current for minimum number of poles 24A (IEC) and 18.5A (UL)
Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
Clamping range from 0.13mm² to 3.31mm²
Wire connection cross section from AWG 26 to AWG 12
Temperature range −50°C up to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller BLZP 5.08HC/180 Series

High current female plug in connector
Rated current for minimum number of poles 23A (IEC) and 20A (UL)
Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
Clamping yoke screw connection
Clamping range from 0.13mm² to 4mm²
Wire connection cross section from AWG 30 to AWG 12
Temperature range −50°C up to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller BUZ 10.16HP/180 Series

High power female plug in connector
Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
Dimensions of L1 10.16mm to 81.28mm (depending on the number of poles required)
Clamping range from 0.2mm² to 16mm²
Wire connection cross section from AWG 22 to AWG 6
Temperature range −50°C up to +130°C
CSA and UL 1059 approved, IEC listed

Weidmüller BVF 7.62HP/180 Series

High power female plug in connector
Rated current for minimum number of poles 57A (IEC) and 39A (UL)
Dimensions of L1 7.62mm to 45.62mm (depending on the number of poles required)
Clamping range from 0.5mm² to 10mm²
Wire connection cross section from AWG 24 to AWG 8
Temperature range −50°C up to +125°C
CSA and UL 1059 approved, IEC listed

Weidmüller LLF 7.50/90V Series

PCB terminal connector
Rated current for minimum number of poles 41A (IEC) and 35A (UL)
Dimensions of L1 7.5mm to 82.5mm (depending on the number of poles required)
THT solder connection with a solder pin length of 5mm
Wire connection cross section from AWG 24 to AWG 8
Temperature range of −40°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LLFS 7.50/180V Series

PCB terminal connector
Rated current for minimum number of poles 41A (IEC) and 37A (UL)
Dimensions of L1 7.5mm to 82.5mm (depending on the number of poles required)
THT solder connection with a solder pin length of 5mm
Wire connection cross section from AWG 24 to AWG 8
Temperature range of −40°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LM 5.08/90 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 15A (UL)
Dimensions of L1 5.08mm to 119.84mm (depending on the number of poles required)
SMT solder connection with a solder pin length of 3.5mm
Wire connection cross section from AWG 24 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMD 3.50/180 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 3.5mm to 38.5mm (depending on the number of poles required)
SMD solder connection
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMD 3.50/90 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 3.5mm to 38.5mm (depending on the number of poles required)
SMD solder connection
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMD 5.00/180 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 5mm to 35mm (depending on the number of poles required)
SMD solder connection
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMD 5.00/90 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 5mm to 35mm (depending on the number of poles required)
SMD solder connection
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMD 7.50/180 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 7.5mm to 37.5mm (depending on the number of poles required)
SMD solder connection
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMD 7.50/90 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 7.5mm to 37.5mm (depending on the number of poles required)
SMD solder connection
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMT 3.50/180 series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
SMT solder connection with a solder pin length of 3.5mm
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMT 3.50/90 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
SMT solder connection with a solder pin length of 3.5mm
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed

Weidmüller LSF-SMT 5.00/180 Series

PCB terminal connector
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Dimensions of L1 5mm to 35mm (depending on the number of poles required)
SMT solder connection with a solder pin length of 3.5mm
Wire connection cross section from AWG 28 to AWG 14
Temperature range of −50°C to +120°C
CSA and UL 1059 approved, IEC listed